产品中心

服务热线:

18560002720

联系我们
您的位置: 首页 >新闻资讯 > 常见问答 >
济南富美家防火板和防火涂料哪个更好?
发布时间:2020-05-22    发布人:富美家防火板小编   网址:https://www.zhumeiyike.com/   点击:
  在室内装饰中,特别是在大城市在室内装饰中,火越来越高的需求,在装修过程中选材的选购很多防火材料、防火板等装饰耐火板、阻燃涂层,应用很广,用量非常大,但不同的材料会带来不同的影响,不同的装饰性能,防火板和防火涂料这两种材料如何选择?今天济南富美家防火板小编就简单介绍一下吧。
  In the interior decoration, especially in the interior decoration of big cities, there is a growing demand for fire. In the process of decoration, a lot of fireproof materials, fireproof boards and other decorative fire-resistant boards and flame-retardant coatings are selected, which are widely used and used in a large amount, but different materials will bring different effects and different decorative properties, How to choose fire-proof board and fire-proof coating? Let's briefly introduce them today.
  一、防火板的性能
  1、 Performance of fireproof board
  防火板厂家的板材其实是指防火板,它是由防火板和基材通过热溶胶经高温高压粘制成的。
  The board of fire-proof board manufacturer actually refers to fire-proof board, which is made of fire-proof board and base material by hot-melt adhesive through high temperature and high pressure.
  济南丰富美丽的小编介绍生产防火板、防火板公司原纸经过三聚氰胺树脂和酚醛树脂的主要物理性质由树脂显示属性,三聚氰胺热固性树脂具有良好的光泽,透明度好,表面硬度高,耐磨,耐高温,耐冲击,表面的毛细孔小不易污染,耐药,耐水,耐溶剂、耐燃性能好,耐电弧、电气绝缘,机械强度好,不易老化。而酚醛树脂经热固性成型后具有耐热性和硬度等性能。
  This paper introduces the main physical properties of the base paper produced by Jinan fire-proof board and fire-proof board company through melamine resin and phenolic resin. The melamine thermosetting resin has good luster, good transparency, high surface hardness, wear resistance, high temperature resistance, impact resistance, small pores on the surface, not easy to be polluted, drug resistance, water resistance, It has good solvent resistance, fire resistance, arc resistance, electrical insulation, good mechanical strength and is not easy to aging. After thermosetting, phenolic resin has the properties of heat resistance and hardness.
  在家具面、门窗套、踢脚线、门板、背景墙、橱柜、陈列柜、办公室间隔断、医院挂墙等方面,防火板都可以应用。
  The fireproof board can be used in furniture surface, door and window cover, skirting line, door panel, background wall, cupboard, display cabinet, office partition, hospital hanging wall, etc.
  二、防火涂料的性能
  2、 Performance of fire retardant coating
  防火涂料涂刷的被动防火材料的表面保护,任何保护的对象熊大火测试的极限值,无论建筑的结构遇到火灾很长一段时间要崩溃。防火涂料的作用是能够起到保护物体表面的隔离作用,延缓建筑物倒塌的时间,为抢救和灭火争取宝贵的时间。确切地说,防火涂料也有其防火极限,超过防火极限后,被保护的物体表面还会着火。
  For the surface protection of passive fire-resistant materials coated with fire retardant coating, the limit value of bear fire test for any protected object, no matter the structure of the building will collapse for a long time in case of fire. The function of fireproof coating is to protect the surface of objects, delay the collapse of buildings, and strive for valuable time for rescue and fire fighting. To be exact, fire-proof coating has its fire-proof limit. When the fire-proof limit is exceeded, the surface of the protected object will catch fire.
济南富美家防火板
  1. 做一个初步的检查产品的质量现场:切2至3小样本构造的基础材料,或带少量的样品,并应用在2到3件150毫米×150毫米胶合板,然后油漆他们根据实际施工情况。干燥后,检查酒精灯的火焰。火焰高度约40mm,喷火时间一般为20min。检查涂层发泡情况。正常情况下,按规定用量(一般为500克/平方米)施工,一次防火涂料的气泡层厚度应在20mm以上,二次防火涂料的气泡层厚度应在10mm以上,气泡层应均匀致密。
  1. Make a preliminary inspection on the quality site of the products: cut 2-3 small samples of the basic materials, or take a small number of samples, and apply them to 2-3 pieces of 150 mm × 150 mm plywood, and then paint them according to the actual construction situation. After drying, check the flame of the alcohol lamp. The flame height is about 40mm, and the time of fire spraying is generally 20min. Check the coating foaming. Under normal circumstances, the construction shall be carried out according to the specified amount (generally 500g / m2), the thickness of the bubble layer of the primary fire retardant coating shall be more than 20mm, the thickness of the bubble layer of the secondary fire retardant coating shall be more than 10mm, and the bubble layer shall be uniform and dense.
  2合格的阻燃涂层的火炬和其他强大的火燃烧,将大量的泡沫膨胀,表面聚合,几分钟不会出现燃烧现象,和假冒伪劣防火涂层基本上是没有泡沫,将会出现大量的分散渣,木材将很快发生燃烧损坏现象。
  2 the flame and other strong fire of qualified flame-retardant coating will expand the surface of a large number of bubbles and surface polymerization. There will be no combustion phenomenon for several minutes. The fake and shoddy fireproof coating is basically no foam, and a large number of dispersed slag will appear. Wood will soon burn and damage.
  3.检查产品是否有国家消防质量检验出具的合格检验报告,或上网查询。防火涂料实行国家强制性产品认证制度,市场上销售的防火涂料应具有国家强制性产品认证证书和型式检验合格报告。
  3. Check whether the product has the qualified inspection report issued by the national fire quality inspection center, or check online. The national compulsory product certification system shall be implemented for fire retardant coating, and the fire retardant coating sold on the market shall have the national compulsory product certification certificate and type inspection qualification report.
  4. 在实际使用中,为了保证防火涂料的耐火性等性能,一般需要使用一种透明覆膜涂料。防火涂料的用量一般为350 ~ 500克/平方米,覆盖层的用量一般为50克/平方米。
  4. In practical use, in order to ensure the fire resistance and other properties of fire retardant coating, a transparent coating is generally required. The consumption of fireproof coating is generally 350 ~ 500g / m2, and the consumption of covering layer is generally 50g / m2.
  可以看到在上面的声明和两种阻燃涂层材料的选择防火板需要的基础上我的环境和工程实际情况,用于装饰需求较高,如高档办公室,星酒店和其他公共区域或预算足够的家庭装修中,可以选择防火板装饰,这样的装饰纹理更强;
  It can be seen from the above statement and the actual situation of my environment and project based on the needs of fire-retardant coating material selection and fire-retardant board, which can be used in the decoration of high-end offices, star hotels and other high-end public areas or families with enough budget, and can be used for the decoration of fire-retardant board, so that the decoration texture is stronger;
  济南富美家防火板公司小编如果是用于大面积厂房装修装修可以选用防火涂料,这样性价比会更高;https://www.zhumeiyike.com/
  Jinan fumeijia fire-proof board Co., Ltd. can choose fire-proof coating if it is used for decoration of large-area factory buildings, so the cost performance will be higher; https://www.zhumeiyike.com/