产品中心

服务热线:

18560002720

联系我们
您的位置: 首页 >新闻资讯 > 行业新闻 >
济南富美家抗倍特弯曲板的预处理
发布时间:2020-06-12    发布人:富美家防火板小编   网址:https://www.zhumeiyike.com/   点击:
  为了达到稳定性,关键的因素是在上胶前对芯材、面板和后板进行预调整。预处理确保当材料对相对湿度的变化做出反应时尺寸收缩更小化。通过以下步骤可以达到耐火板的平衡状态;在未来,任何由湿度变化引起的变化都将平衡在防叠板的两侧,大大降低弯曲变形的风险。
  In order to achieve stability, the key factor is to pre adjust the core material, panel and back plate before gluing. Pretreatment ensures that dimensional shrinkage is minimized when the material responds to changes in relative humidity. In the future, any change caused by humidity change will be balanced on both sides of the anti stack plate, greatly reducing the risk of bending deformation.
济南富美家抗倍特
  在粘结装饰耐火板和芯材之前要进行调整,使所有材料达到平衡状态,既不太干也不太湿,在压制时更重要的是不要太湿。在压干储存区(温度20℃,相对空气湿度50-60%)可获得效果。
  Before bonding the decorative refractory plate and core material, it is necessary to adjust them so that all materials are in a balanced state, neither too dry nor too wet. The most important thing is not too wet when pressing. The best effect can be obtained in the compressed storage area (temperature 20 ℃, relative air humidity 50-60%).
  对于两面相同的防双复合板材,应成对调整,使磨砂表面相对,以达到效果。然后,将上述两对盘子储存起来,并将它们盖在一起至少三天,以达到水分平衡。这保证了上胶前的含水率几乎是相同的,并且在随后的任何尺寸变化中,复合板的每一面都将保持相同的尺寸和相位方向变化。木芯的建议含水率为9%。耐火板的含水率不能用普通的湿度计测量,必须采取其他措施保证面板的含水率与对应的后板相同。
  For the double composite plate with the same two sides, it should be adjusted in pairs to make the frosted surface relative to achieve the best effect. Then, store the two pairs of plates and cover them together for at least three days to achieve water balance. This ensures that the moisture content before gluing is almost the same, and in any subsequent size change, each side of the composite plate will maintain the same size and phase direction change. The recommended moisture content of wood core is 9%. The moisture content of fire-resistant plate cannot be measured by ordinary hygrometer, and other measures must be taken to ensure that the moisture content of the panel is the same as that of the corresponding back plate.
  如果复合板是暴露于低常数相对湿度(如散热器盒)在未来的应用中,耐火材料和核心板屋顶必须调整一段时间在温暖干燥的条件下允许材料并避免任何后续收缩应力。对于所有镶有装饰防火面板的面板和板材,必须使用同一材料的相反一面,以抵消可能发生的尺寸变化的影响。
  If the composite plate is exposed to low constant relative humidity (such as radiator box) in future applications, the refractory and core plate roof must be adjusted for a period of time to allow the material to be warm and dry and to avoid any subsequent shrinkage stress. For all panels and plates with decorative fire protection panels, the opposite side of the same material must be used to counteract possible dimensional changes.
  以上是济南富美家抗倍特小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.zhumeiyike.com
  These are the relevant contents introduced by Jinan fumeijia anti Beite small edition. If you want to know more, please visit the website: https://www.zhumeiyike.com