Fireproof board, also known as fire-resistant board, is also known as thermosetting resin impregnated paper high-pressure laminated board. It is a fire-resistant building material for surface decoration, with rich surface colors, lines and special physical properties. Fireproof boards are widely used in interior decoration, furniture, kitchen cabinets, laboratory countertops, exterior walls and other fields.
Daily maintenance method of fireproof board wardrobe: avoid the water on the table to soak into the cabinet fireproof board, otherwise it will deform after a long time. If the oil dirt accumulates in the cabinet fireproof board sink for a long time and is not easy to clean, pour some detergent to remove the oil stain in the cabinet fireproof board sink and then rinse with hot water. In case of looseness and abnormal noise in the hinge and handle of cabinet fireproof board, it shall be adjusted in time or the manufacturer shall be notified for maintenance. Every time you clean the cabinet fire board sink, you must remember to clean the pipe behind the filter box, so as to avoid the accumulation of oil dirt for a long time.
The fireproof board of solid wood cabinet can be cleaned and maintained with furniture wax, and the fireproof board of crystal cabinet can be wiped with flannelette wet water or neutral detergent. The fireproof board of paint cabinet must not use soluble detergent. All benzene solvents and plastic fat solvents should not be used as panel cleaner. The containers put into the cabinet shall be cleaned before putting in, and special attention shall be paid to wiping the water on the container dry. The hardware equipment in the fire-proof board of the kitchen cabinet must be wiped with a dry cloth to avoid certain water marks caused by water droplets on the surface.
The maintenance of the fireproof board is similar to the general painted ceiling, but when maintenance is required, in order to ensure the high-performance effect and beauty of the ceiling, please be sure to deal with it according to the specified practices. The dust or loose soil shall be cleaned with a brush or vacuum cleaner. The accessories of the vacuum cleaner shall be the type of curtain cloth or wall, and must be cleaned in one direction to avoid rubbing the dust into the ceiling surface again. After the dust is cleaned, such as lead wool marks, dirty spots, or attached dirt can be wiped with general art glue. For example, wipe with high-quality wall cleaner, squeeze the water in the sponge as dry as possible. After wiping, the thin touch of the cleaner can be cleaned with a rag or a little wet sponge with clean water.